Flexaust® Flex-Lok® Aluminum Hose ET, Fume
This exhaust hose has fabric locked around a coated steel wire by a metal strip formed into a clip that acts as a wearstrip providing outstanding external abrasion resistance. It is extremely compressible and flexible but not recommended for continuous flexing. Single-ply aluminum coated fiberglass fabric hose
Applications: Recommended for Fume Control Applications Aircraft Automotive Brick Kilns Chemical Plants Diesel/Engine Exhaust Exhaust Systems Foundries Fume Exhaust Garage Exhaust Heater High Temperature Applications Jet Fuel Vapor Venting Paper Mills Plastics Industry Pollution Control Rocket Support Duct Tractor Pull Exhaust Vapor Recovery Hose Vehicle Exhaust Systems Welding
Single Ply Aluminum Coated Fiberglass | |||||||
Mechanically Crimped in a Continuous Process, Silver, 25' Lengths, Temp range -65/+1050 F, Intermittent 1250 F | |||||||
Part # | ID | Compression Ratio (Ft:In) | Max Neg Pressure (in/hg) | Max Pos Pressure (PSI) | Min Bend Radius | Price | Order Online |
---|---|---|---|---|---|---|---|
KH-1532 | 3.00" | 6:01 | 4.10" | 11.11 | 2.50" | $2,065.35 | Add to Order |
KH-1393 | 4.00" | 6:01 | 3.20" | 5.86 | 3.00" | $3,058.21 | Add to Order |
KH-1394 | 5.00" | 6:01 | 3" | 4.7 | 3.50" | $3,705.63 | Add to Order |
KH-1395 | 6.00" | 6:01 | 2.80" | 3.93 | 4.00" | $4,500.04 | Add to Order |
KH-1398 | 7.00" | 6:01 | 2.70" | 3.8 | 5.00" | $4,631.73 | Add to Order |
KH-1399 | 8.00" | 8:01 | 2.50" | 3.67 | 5.50" | $4,977.18 | Add to Order |
KH-1413 | 9.00" | 8:01 | 2.30" | 3.2 | 6.30" | $5,691.35 | Add to Order |
KH-1401 | 10.00" | 8:01 | 2" | 2.94 | 7.00" | $6,353.46 | Add to Order |
KH-1406 | 12.00" | 8:01 | 1.50" | 2.46 | 8.50" | $7,067.64 | Add to Order |
Rev. 06-21 |
Diameter Tol. -0/+.125"
Accessories | ||
J Locks | Bridge Clamps | Connectors - Aluminum |
Latch Locks | Pin Locks |
Flexaust® is a registered Trademark of Schauenburg Company