Fluorosint Rods

Continuous use temperatures to 500F (260C). Fluorosint's unique properties are the result of a proprietary process in which synthetically manufactured mica is chemically linked to PTFE.

This bonding results in properties not normally attainable in reinforced PTFE. Fluorosint grades offer an excellent combination of low frictional properties and dimensional stability.  Synthetic Mica filled.

Fluorosint 500 has nine times greater resistance to deformation under load than unfilled PTFE (tested according to ASTM D 621; stress of 14 MPa of 50C). Its coefficient of linear thermal expansion approaches the expansion rate of aluminium and is 1/5 that of virgin PTFE. It is considerably harder than virgin PTFE, has better wear characteristics and maintains low frictional properties. Fluorosint® 500 is also non-abrasive to most mating materials.

Flurosint® 500 Plastic Rod :  

Technical Data Sheet

Diameter Part # Price Per Foot Order Online
.500 KR-2886 $110.31 Add to Order
.750 KR-2885 $119.50 Add to Order
1.000 KR-2884 $165.70 Add to Order
1.250 KR-2883 $246.06 Add to Order
1.500 KR-2882 $328.49 Add to Order
1.750 KR-2881 $463.76 Add to Order
2.000 KR-2880 $516.73 Add to Order
2.500 KR-2911 $835.00 Add to Order
2.750 KR-2934 $972.65 Add to Order
3.000 KR-2908 $1,045.96 Add to Order
3.500 KR-2928 $1,293.98 Add to Order
4.250 KR-2931 $1,848.95 Add to Order
5.000 KR-2926 $2,348.14 Add to Order
5.500 KR-2935 $2,799.00 Add to Order
6.000 KR-2936 $3,295.58 Add to Order
7.000 KR-2937 $4,345.81 Add to Order
8.000 KR-2938 $5,548.50 Add to Order
8.750 KR-2939 $6,557.24 Add to Order
Rev. 04-22, 11-21, 06-21

Diameters OD Tolerances Inch Standard Length Feet
1/2" to 3/4" +/-.001" 4 Feet
1.00" to 1.25" +.010"/-.000" 4 Feet
1.50" to 4.75" +.125"/-0.00" 1 Foot
over 5.00" +.250/-0.00 1 Foot
<<